Tiny Monster 03 2800Lm flashlight - Nitecore

The TM03 is equipped with a CREE XHP70 LED, for a power of 2800 lumens and a range of 289 meters. It has two modes, giving quick access to turbo mode or strobe mode.

1. CREE XHP70 LED for a power of 2800 lumens
2. 4 intensity levels: low (40lm), medium (550lm), high (1350lm), turbo (2800lm)
3. 2 special modes: mode 1, mode 2
4. 1 meter impact resistance
5. IPX8 standard, submersible up to 2 meters
6. Tactical button and secondary button at the base of the handle for access to different modes.

Unfailing performance:

• Maximum power: 2800 lumens
• Maximum intensity: 21000 candelas
• Maximum range: 289 meters
• Maximum autonomy: 30 hours
  
  
• Minimum power: 40 lumens
• Minimum intensity: 228 candelas
• Minimum range: 30 meters
• Minimum battery life: 15 minutes

Intuitive interface

The TM03 has an intuitive user interface, with its switch and mode button. Press the switch until you hear a click to turn the blade on. Press the mode button to access all brightness levels (low, medium, high, turbo). The TM03 memorizes the last light setting.
Note: When its temperature exceeds 50°C, the TM03 automatically reduces its lighting level. When the temperature drops below 50°C, the lamp gradually increases its lighting level to high level.

2 special modes: turbo and strobe ready

Mode 1
Quick access to Turbo level: In any lamp configuration, including when it is off, press and hold the MODE button for more than 0.2 seconds to access the highest brightness level (Turbo), and release to return to the previous setting.
Quick access to the Strobe: In any lamp configuration, including when it is off, press the MODE button twice to access the Strobe, and press again to return to the previous setting.

Mode 2 (STROBE READY)
Quick Access to the Strobe: In any lamp configuration, including when it is off, press and hold the MODE button for more than 0.2 seconds to access the Strobe, and release to return to the previous setting.
Quick access to Turbo level: In any lamp configuration, including when it is off, press the MODE button twice to access the Turbo level, and press again to return to the previous setting.

Mode selection
The TM03 lamp has two special modes: mode 1 and mode 2 (STROBE READY™):
Step 1: With the lamp off, remove the battery, and put it back in place;
Step 2: Within 60 seconds, tighten (screw) the top of the lamp while pressing the MODE button;
Step 3: Observe the flashing after tightening: one flash for mode 1, and two flashes for mode 2 (STROBE READYTM).
Note: Mode selection is only possible if the battery is greater than 3.7V.

Battery display
When the TM03 is on, the power LED will flash once every two seconds when the power level drops to 50%. It will flash quickly when the power level is low. Each time the battery is changed, the lamp will emit a light signal to indicate the battery voltage. For example, when the battery has a voltage of 3.4V the lamp will flash 3 times, pause then again 4 times.

Thermoelectric separation technology maximizing heat dissipation
The TM03 uses thermoelectric separation technology for its copper substrates. Allows internal heat to dissipate to the outside. Optimizes the stability of the MH20 during long-term work and significantly extends the lifespan of the LEDs.

ATR (Advanced Temperature Controller)
With the advanced temperature regulation module, the TM03 regulates its light output and adapts to the ambient environment, maintaining optimal performance.

Precision Digital Optics Technology (PDOT)
Tailor-made design for research and hunting benefits from a large reflector and an optical system associated with a crystal coating, all equipped with “Precision Digital Optics Technology” (PDOT).

Material reliability
The TM03 is equipped with tempered mineral glass with anti-reflective coating and anti-slip strips. Constructed of aircraft grade aluminum alloy, military grade HAIII anodized finish.

Features

Item Type: Torch
Maximum autonomy (h): 30
Maximum lumen: 2800
Range (meters): 289
LED type: CREE XHP70
Power supply: 1x18650 for TM03 (Rechargeable) included (NCNI18650D)
Dimensions (mm): L: 159 / Dia. Head: 40 - Dia. Body: 30
Waterproofing: IPX-8/2m
Case: Yes
O-ring(s): Yes
Strap: Yes
Battery: Yes
USB cable: No
Clip: No
Shock resistance: 1 meter
Strobe mode available using the strobe ready button.
Tactical switch on the back

- Uses a CREE XHP70 LED
- Length: 159mm - Head diameter: 40mm - Body diameter: 30mm - Weight: 213g
- Maximum power of 2800 lumens
- Built-in “precision digital optical technology” provides extreme reflection performance
- Maximum intensity of 21,000 candelas for a maximum projection distance of 289 meters
- Tactical button and mode button giving access to four brightness levels two special modes
- Direct current circuit, provides a maximum autonomy of 30 hours
- Direct access to power in turbo mode, strobe
- Reverse polarity protection prevents damage caused by incorrectly inserted batteries
- Tempered mineral glass with anti-reflective coating
- Constructed of aircraft grade aluminum alloy, military grade HAIII anodized finish
- Waterproof to IPX8 standard (submersible up to 2 meters)
- Impact resistance 1 meter
- Battery: 1 NI18650D IMR18650 battery (included) dedicated to the TM03
- Accessories : NI18650D, Case, O-ring, User manual