BR25 1400Lm flashlights - Nitecore

• NL2150R battery / Format 21700 / Capacity 5000mAh
• Replacement O-ring
• USB-C cable
• Strap
• Magazine for 18650/RCR123 batteries
• 4 mounting pads (2 thin / 2 thick)
  

The BR25 lamp is a superb bicycle lamp thanks to its brilliant design: you will be able to see better in the distance, see your bike at night and not blind other road or lane users as well as always being visible. However, it can also be used as a portable flashlight with its different modes, solid and waterproof construction, installation within everyone's reach, affordable price. In addition, the battery can be easily replaced with a spare part. This light attached to the bike ensures good projection of the beams during nighttime rides, which provides increased visibility and offers more confident driving. If there is one thing that must be highlighted, it is its versatility! It's a stunning and impressive product for a long-term investment, especially since its battery is rechargeable. Easy to use, bright lamp with good quality/price ratio, it is obvious that you will have no regrets when purchasing this product.

Added to the collection in 2021, the BR25 is a very compact, high-performance lamp which has a lighting power of up to 1,400 lumens with 4 brightness levels as well as a warning mode. Being equipped with a triple range, this lamp will allow you to illuminate your bike both in front of you and at a long distance (163m). Its particularity means that it will not dazzle the people in front of you, its lighting angle has been adapted for these specific cases, unlike other similar lamps. With this lamp you are fully equipped to move around at night, in town and in complete safety! Easily installed on all types of handlebars, the BR25 can also be detached from its support and used as a flashlight. Lightweight, aerodynamic, with triple range and different lighting modes, waterproof according to the IP68 standard (submersible up to 2 meters deep) and rechargeable, the BR25 is undoubtedly the ideal city lamp.

Installing the battery
Install the battery and lock the cap.
Note: after installing the battery, the switch under the mode button will flash to indicate the remaining charge
If the product is stored in a backpack or unused for a while, remove the batteries to avoid accidental activation or battery leakage.
Use the supplied mounting pads according to the handlebar diameter. (34-38mm bar does not require a pad; 29-35mm bar requires 2 thin pads; 25-29mm bar requires one thin pad and one thick pad; 20-25mm bar requires 2 thick pads.

ON/OFF
Ignition
When the lamp is off, press and hold the switch button to turn the lamp on.
Extinction
When the lamp is on, press and hold the switch button to turn the lamp off completely. Change brightness levels. When the light is on, press the switch button to cycle between Low – Mid – High and Turbo modes.
Note: The BR25 has a memory function that remembers the previously used brightness mode and level. It will automatically enter memory mode and brightness the next time it is turned on. The lamp will return to LOW mode each time the batteries are changed.

Direct access to TURBO
When the lamp is on (TURBO and flashing warning excluded), press the switch twice to go directly to TURBO. Short press the switch again to return to the previous brightness level, or the BR25 will automatically return to the previous brightness level if there is no operation within 30 seconds.

Red Flashing
At any time, press the switch 3 times quickly to activate flashing mode. Quickly press the switch to return to the previously saved brightness level. Repeat the operation to turn off the lamp.

Remaining charge
• When the battery is inserted, the switch will flash to indicate the battery voltage (±0.1V). For example, when the battery voltage is at 4.2V, the power indicator will flash 4 times, followed by a 1.5 second pause and 2 more flashes. Different voltages represent the remaining battery charge levels
Note: When using two CR123/RCR123 in series, the switch will indicate the average voltage between the two batteries.

• When the mode button is pressed while the light is off, the switch flashes to indicate the remaining charge:
3 flashes for a charge above 50%
2 flashes for less than 50% charge
1 flash for a charge less than 10%

• When the lamp is turned on and the power level is near 50%, the switch will flash slowly to notify the user. When the light is on and the device is almost exhausted, the switch will flash quickly and continuously to notify the user.
Batteries should be replaced when the output seems low or the bike light stops responding due to low power.

ATR Temperature regulation
With the Advanced Temperature Regulation module, the BR25 lamp regulates its output and adapts to the environment, maintaining optimal performance.

Maintenance
Every 6 months the threads should be wiped with a clean cloth followed by a thin coating of silicone based lubricant

Video